E-Z Products 4 F.s. White Pool Tile Grout Repair (Fast Set) 1 Lb.

I had accumulating a couple of dozen loose pool tiles. I used EZ Patch for both the plaster to mount the tiles and the grout that fills in the spaces between tiles. Both worked well. The grout was easier to apply and cleanly remove for the tile surfaces after about 5 minutes after application. The plaster was easier to get a smooth putty like feel, while the grout wanted to clump, but would eventually smooth out. Overall, I got a fair job for a newby to working with pool tiles, for about $75 dollars (plaster, grout, two trowells, and a nice sponge). My pool guy said he could barely tell which ones I had applied from those still in place, and guessed that I saved $300 to $500. Recommended.

I researched a product to repair missing grout from between tiles above waterline in my pool. This product had good reviews and even mentioned that it could be used below water line. As it turned out, I let the water level drop in my pool to below the problem areas so underwater use was not needed. This product worked great. It does set up very quickly (<5 minutes) so mix in small batches. I used a red solo cup to mix a small amount at a time. The product is easy to use and looks great matching the while grout that is already between my pool tiles. After five days it looks very sturdy without signs of failure. I highly recommend this product as it delivers what is promised.

It does what it claims. For my size pool stone/coping, I was able to get about 6 or 7 lines done. Wish there was more, so I have to order again. Price jumped, though.

When working with it under water, I mixed it a little dry or let it sit just a bit to get firm. This prevented it from breaking up or dissolving while working with it under water. Super easy to use. This stuff doesn't go very far...I used almost the whole container for just a few cracks (they were big and deep...around the skimmer. It's a bright white...I should have colored it but you don't notice it where I patched it

Easy DIY and looks great after waiting at least 12hrs to cure!! Saves yourself from having to pay pool companies over $1,000 just to re-grout your pool tiles. For chips/cracks in grout you may need to do 2 applications to make grout even & flush. Add very little water (I added water by cap ful of a water bottle). It will harden up quickly but you can add few drips or capful of water & stir it to loosen it up while working outside in sun/heat. My pool is 35,000 gallons & I needed 1 & 1/2 of these to complete my complete tile re-grout (including tiles in my skimmer).

I like that it filled the damage area of my pool. I won’t know for a while It’s durability.There’s really not much help for mixing instructions. So be very careful. It’s expensive and a hair too much water means you’re mixing more powder than you ever wanted to.

Having this in powder form makes it very easy to adjust the amount needed for each job. Mixes and adheres well.

I tried this product for tiles on a table in the pool. I had great hopes but, unfortunately, the tiles fell right off the next day and the product was all chalky and crumbled easily. I cleaned it all off and went with traditional mortar ( one for pools / submerged ) and that's holding them like one would expect. Also, given the small amount of this product, a 50lb bag of traditional mortar is a better value! Too good to be true! And this isn't my first time doing pool masonry - just my first time using this product for the job.