Ancor102810 Tinned Copper Wire, 16 AWG (1mm2), Red - 100ft

Unlike so many wiring products available at parts stores and online, this wire absolutely lives up to the hype to justify it's higher cost.Ancor is a well known brand in the marine/boat and truck/trailer industry, and chances are if you go to any marine shop and try to buy lengths of wire, Ancor will be the wire they sell off a bulk spool.The insulation is great, with excellent resistance to temperature, solvents and I've had zero issues with corrosion penetrating very far from any knicks or failed spots from wear & tear.The wire is stiffer than the average primary wire you'll find at a parts store, this is tinned copper. 16AWG is likely better than the 14AWG you'll find at the store, and managing lengths will be challenging if you don't take the time to route your run. Pre-bend, and you *can* use a heat gun or hair dryer to warm up the insulation to make this easier. When it cools, it will have a bit of memory, helping route your cabling.You'll still need to use common sense with sheathing and protection.

Nice wire used on my boat

I used this for wiring lights on my boat. Works good, I have no issues.

The gold standard for cable period. A PLUS

I’ll only use Anchor Marine wire in my van build. It’s made for marine ( wet) applications and can handle the vibration and temperature changes that is a part of van dwelling. I am sure it’s superb for marina use, too.

It was what they said it was needed to extend the wiring from my boat motor to the key switch worked out great

Save money on your project and buy the roll. It's way cheaper than by the foot at West Marine.Don't use the cheap stuff, it will corrode

Easy to work with around corners.