Supplying Demand WB24X25013 4464832 Electric Range Infinite Control Switch Replacement Model Specific Not Universal

These worked great and were very easy to install on my GE range. The issue I was having is that the two front burners were getting extremely hot even at a low setting, and this solved the problem, with the full range of temperatures working perfectly now. I don't see any reason to go with a more expensive OEM part over this, especially when my GE range is only about six or seven years old, and two of them already failed.Installation was very easy, with the hardest part being moving the range out to get behind it. A tip if you can't get it to move initially: Putting a pry bar under one corner and stepping on it and raising up the corner slightly while pulling the range is an easy trick to get it moving. Once I did that, the range slid right out. Make sure you unplug it! Aside from that, the only tools you need are a screwdriver and some pliers to pull the wires off of the old control switches. Mine did not come off easily, so I wouldn't plan on being able to pull them off by hand. Overall I only spent about 15 minutes replacing both, and I can finally cook without constantly taking the pan off of the stove over and over again.

I installed this switch to replace my existing burner switch that made a popping sound and tripped my circuit breaker which resulted in turning off power to my stove. The switch was burnt black in one area upon inspection. After this happened and I reset my breaker my burner just constantly would power on and off at a steady pace no matter where I set the knob. I looked up on the GE website which particular part number I needed and found this part on Amazon. It arrived next day and fixed my issue. Just take pictures and put the connections back on the way you took them off the old part. My OEM GM burner switch only lasted less than 2 years which is the same age as my oven. I hope this replacement part lasts longer than that. It fixed my front right large burner.

Ordered due to front burners having very inconsistent temperatures. Extremely simple to replace. So far working great, now have consistent heat back.

Switch was upside down as others have said. But replacing knob and turning 180° corrected it. Burner now has two settings and not constantly on high. Only problem is the burner on light stays on. Searched for a fix but no luck. I can deal with the light being on as long as I have my burner working correctly!

I bought this universal part for my GE smooth top stove. The burner would immediately turn red hot no matter what number we set it to. I researched and this was the part I needed. Install was easy about a week now works like a charm no issues with the part or the install

This was easy to replace the worn out piece. Burner controls to temp now inside of immediately going to max temp. No issues installing, fit was spot on.

I love it the switch fits perfect plug in and play 👍🏻 very easy.

Went out in 5 months. Exact thing. Would not turn off. Reordered from Amazon today. Should have a warrenty.